Custom Artificial Autumn Maple Tree for Photo & Film Sets
Application: Photo & Film Sets · Custom heights 3–6 m
We build custom artificial maple trees for photo and film sets — 3–6 m specimens, NFPA 701 fire-retardant treatment available as an option, engineered per project. Set planting has to read on camera and reset fast between takes. We build colour-stable specimens and blossom trees that arrive finished and need no watering on set.
- Colour set at the factory, not dyed to fade
- No leaf drop onto product below
- Branching modelled on a mature Acer
Autumn Maple Tree Build Spec
| Unit Size | 3–6 m, canopy 2–4 m |
|---|---|
| Height Range | 2–8 m (customizable to your photos or drawings) |
| Trunk | Sculpted fiberglass trunk with branching modelled on mature Acer. |
| Foliage | PE and PU materials; optional UV-resistant finish for outdoor use. |
| Base | Steel plate base — set in concrete or installed in a planter. |
| Fire Retardancy | Optional NFPA 701 / BS 5867. |
| Maintenance | No routine maintenance — no watering, feeding or leaf cleanup. |
| Lead Time | Standard builds 7–10 days; custom builds 15–20 days. |
What This Venue Needs
Sizing
Set specimens run 1.5–6 m, supplied with the crown pre-shaped so it reads full on camera from the first setup.
Compliance & Anchoring
Colour-stable foliage; individually wired blossom petals so crowns stay full; no irrigation on set.
Autumn Maple Tree specified for Photo & Film Sets
Autumn Maple Tree (SKU VW-MPL-350) is quoted at 3–6 m for photo and film sets, against the 1.5–6 m height band this venue is engineered for. Re-assembly after a seasonal change is part of the brief.
Buying parameters for this venue
| Reference SKU | VW-MPL-350 |
|---|---|
| Species height range | 3–6 m |
| Venue height band | 1.5–6 m |
| Base & fixing | Pre-shaped crown · No irrigation on set |
| Documentation | For VW-MPL-350: Colour-stable foliage; individually wired blossom petals so crowns stay full; no irrigation on set. |
Installation, materials & documentation
Retail and display builds are designed for seasonal change: the crown breaks into numbered sections, trunk joints are keyed so they reassemble one way only, and the base plate fits standard trolley access.
Each section is wrapped and cartoned for repeat use, with a parts list and a re-assembly sheet in the shipment so a store team can move the tree without a specialist installer.
Other Trees Specified for Photo & Film Sets
Other artificial trees specified for photo and film sets: Event & Wedding Palms · Cherry Blossom Tree — White
Ordering & Specification FAQs
What buyers ask when specifying maple trees for photo and film sets — MOQ, lead time and this venue's requirements.
MOQ is project-based rather than per-SKU. An autumn maple at 3–6 m with a 2–4 m canopy is quotable on its own; the seasonal colour mix is set at the factory per order, so two trees in the same scheme carry the same tones. Quotation is built around the venue, the height and the quantity.
7–10 days for standard builds, and 15–20 days for custom builds. Lead time starts from approved drawings rather than from the enquiry, and the seasonal colour mix is set at the factory per order — approving the tones with the first drawing keeps a whole batch consistent.
Yes. Blossom petals are individually wired and foliage colour is set at the factory, so the crown reads full under studio light.
Trees arrive finished and fixed, with no planting or watering, so the set resets without a green team.
Yes — 3–6 m with a 2–4 m canopy, on a sculpted fiberglass trunk with branching modelled on a mature Acer. The seasonal colour is set at the factory rather than dyed to fade, and a low planter profile keeps shopfloor sight lines clear. Send the venue drawing and we return CAD options within 12 business hours.
Configure This Tree for Your Photo & Film Sets
Height, trunk finish, foliage density, planter and base plate — tell us the venue and we'll send CAD options within 12 business hours.